Commercial AC Repair in Seattle, WA
Warm air from the vents on a hot afternoon almost always traces back to electrical parts, airflow or controls. A/C Dr. Naz tracks it down for offices, shops, restaurants and light industrial spaces across the city, though we don’t work on homes.

We can often send a tech the same day when capacity allows, and if today is already full, we’ll say so up front and book the next open slot.
How a cooling call goes
Every commercial AC repair call we run for an office, shop or restaurant starts the same way: the tech first confirms the thermostat or building controls are actually telling the unit to cool. Then come amp readings on the compressor and fans, pressures wherever the charge can be checked, and a look at airflow across the condenser coil. Each reading is checked against how the unit’s sequence of operation says it should behave, so the part we replace is the one that actually failed.
What usually breaks
- Compressors that hum and quit, or won’t start at all
- Weak capacitors and contactors burned from years of cycling on and off
- Condenser coils packed with dust, leaves or kitchen grease
- Condenser fans that stall, so pressure climbs until a safety shuts the unit off
- Thermostats, sensors or building controls asking for one thing while the unit does another
Before any part goes in
We walk you through what we measured and what it points to. Then it’s your call: fix it now, keep it limping along while you budget for a new unit, or change the run schedule so the equipment isn’t working as hard.
When an economizer damper sticks open
Reversing valves on dual-mode units
Snapshots from the job
These come from jobs around town, from condensers on low roofs to split systems over busy restaurant kitchens.
Further reading for building engineers
Want the details? Read how we sort out economizer sensor logic, test compressor wiring and starting parts and check a reversing valve.
Our main cooling page covers the whole region, the airflow write-up explains duct readings, and the notes index has the rest.
A hot office affects more than comfort. The EPA and OSHA both publish plain guides on why temperature and fresh air matter at work.
Cities we cover and related repairs
Our crew handles commercial AC repair in Seattle from the Marysville shop, and it also covers Bellevue, Tukwila and Edmonds. If the trouble turns out to be heating, ventilation or the whole building system, our commercial HVAC repair crew takes over. Anything cold, like a cooler, freezer or ice machine, is handled by our cold-side team.
What owners and managers ask us
Why does the unit keep shutting off on hot afternoons?
That pattern usually means pressure on the hot side is climbing too high, often from a dirty condenser coil or a fan motor that’s slowing down, so a safety switch stops the compressor. A coil cleaning or a new fan motor often solves it, and the tech confirms it with pressure readings before doing either.
Do you repair air conditioning in houses?
No, we only work on commercial buildings such as offices, shops, restaurants and light industrial spaces. If it’s a house or an apartment, we’re not the right shop.
Will you work on an older or less common unit?
Usually, yes, since we handle most commercial cooling brands, but very old units or ones with discontinued control boards can make parts hard to find. Email us a nameplate photo when you call so we can check before the trip.
What happens if the system is low on refrigerant?
Low refrigerant means there’s a leak somewhere, so we find it and repair it before we recharge. Every tech on our crew who handles refrigerant holds EPA Section 608 Universal certification.
Can I set up a visit online?
You can send the address and what the unit is doing through our contact form, and we’ll call you back to set a time. If the building is already too warm to work in, calling (425) 535-8990 is faster.
Is the office heating up as you read this?
Our license number is CC ACDRNDN753PG, and the company is licensed and insured.
